So, you just got a new Wi-Fi router. Or maybe you’ve changed your network name because "PrettyFlyForAWiFi" wasn’t working out anymore. Either way, your Ring Doorbell is now sitting offline, blinking in confusion, and you're wondering, “How do I get this thing back online?”
Don’t worry you don’t need to remove your doorbell from the wall or call in a tech wizard. Ring makes it fairly easy to switch networks from the comfort of your smartphone. Here’s a light, no-stress walkthrough to reconnect your Ring Doorbell to a new Wi-Fi network in just a few minutes.
When Should You Change the Wi-Fi on a Ring Doorbell?
Before we jump in, here's when this might come in handy:- You’ve changed your Wi-Fi name or password
- You moved your router or got a new one
- You relocated the Ring Doorbell to a new home
- You're troubleshooting connection issues
Step-by-Step: How to Change Wi-Fi on Ring Doorbell
1. Open the Ring App
Grab your phone and open the Ring app (available on iOS or Android). Make sure you're logged in to the correct account, the one linked to your doorbell.2. Tap on Your Ring Doorbell
From your dashboard or “Devices” tab, find the specific doorbell you want to reconnect. Tap to open its settings.3. Go to “Device Health”
This is where all the network magic happens. Scroll down a bit until you see Device Health, and tap it.4. Tap “Change Wi-Fi Network”
In the Device Health section, select Change Wi-Fi Network. The app will now prompt you to put the doorbell into setup mode.5. Put the Doorbell in Setup Mode
Look for a small orange button on your Ring device. Its exact location depends on the model:- Battery-powered models: The button is usually behind the faceplate.
- Wired models: You’ll find it on the side.
6. Connect to New Wi-Fi
The app will search for nearby Wi-Fi networks. Pick your preferred one (ideally 2.4GHz, unless your model supports 5GHz), and enter the password.7. Wait for Reconnection
The app will handle the rest just wait a moment. Once everything syncs up, you’ll get a confirmation message. And voilà! Your Ring Doorbell is back online.Extra Tips for Smooth Setup
- Stay Close to Your Router, During setup, make sure you’re near your Wi-Fi source for a strong signal.
- Double-Check the Password, Typos happen! One wrong character and the whole thing fails.
- Battery Matters, If you have a battery-powered model, make sure it’s at least 30% charged before attempting setup.
- Know Your Frequency, Some Ring devices only support 2.4GHz. Check your router’s settings if the device doesn’t detect your network.
What If You’re Not Changing Wi-Fi, Just Moving It?
If you’re moving the router to a different room but keeping the same network name and password, your Ring Doorbell should reconnect automatically. But if the signal becomes weaker due to distance or new walls in the way, you might experience delays or lost connections.Consider using a Wi-Fi extender or a mesh system if your front door is far from the router.
Still Not Working? Try This
If you followed all the steps and your Ring still won’t connect:- Restart the router
- Reboot your phone
- Reset the Ring device by holding the setup button for 15–20 seconds
- Try connecting to a mobile hotspot to test if the issue is with your network
Final Thoughts
Changing the Wi-Fi on your Ring Doorbell isn’t complicated, but it’s one of those things that’s easy to forget how to do especially when you’re juggling routers, passwords, and blinking LEDs. With this guide, you can get your doorbell back online without breaking a sweat.And hey now that you’ve got your Ring back up and running, maybe it’s time to change that network name again. “FBI Surveillance Van 3” has a nice ring to it.